Pages

Thursday, November 16, 2017

Christmas Door Gatefold Card

 This was such a fun and easy card to make thanks to Cheryl's awesome files over at creative Kuts.
For the front I simply inked the edges of all pieces and adhered all of the layers, I added foam tape under the top rectangle for each of the rectangle panel sets.   I used gold brads for the door knobs and gold glitter card stock to back them and popped that up on foam tape as well.  Both of the Wreaths I ran through my Cuttlebug textile folder I added a red pearl to the center of each bow and added the red berries with Red Beads in a bottle.
For the inside I simply used some pretty red and white striped pattern paper for each side panel and stamped the center panel with a Green tree and Merry Christmas from a small stamp set in my stash.

I am entering into these fun challenges:
CARDZ TV ANYTHING GOES CHALLENGE #20
FFC #214 Always Anything Goes with A Cutting Cafe!
DL.ART NOVEMBER LINKY
Mod Squad Challenge - Merry & Bright

Thanks so much for stopping by to see what I'm up to in my craft room this week.
Happy crafting to you all!

Sunday, October 8, 2017

Skeleton Coffin shaped card

It doesn't get much easier than this!  Making this simple SVG file card from creativekuts.com, Thank you Cheryl!!!
The adorable skeleton from the file is just 2 main pieces and a few small pieces, the face and the pelvic bone pieces... so easy!  The writing inside and out are both from the file also as a print and cut.  I used my cuttlebug spiders folder on the front purple layer.  I inked edges of everything in Walnut stain distress ink. 
DONE!!!

I am entering into these fun challenges:
Simon Says Monday: A Walk On The Dark Side
DL.ART Thankful Thursday Challenge #213 "Halloween"
CARDZ TV ANYTHING GOES CHALLENGE #16
FFC #209 Always Anything Goes
HIMCR #321- Halloween Colors!
Thanks for stopping by to see my quick and simple SVG card today

Mummy Easel Halloween card

Oh my goodness what a super fun and easy Halloween card to put together.  This is an SVG file from  creativekuts.com
oh my gosh he is so adorable!
So I cut the whole card base out of black and ran the front portion only through my cuttlebug Swiss Dots embossing folder.   I then took my lightest blue ink pad to rub all over it and give it a grunged look.  I used my crafters companion wood grain embossing folder for the fence ... running the pieces thru in either direction.    I then took my black puffy paint to add the nail spots in the fence.  Using my Martha Stewart punch I added the purple border of drips at the top of the card.   I also went around the bat with the light blue ink so that it could stand out from the background.
I absolutely love how this card looks once it standing up in the Easel position.   I printed the Happy Halloween sentiment from my computer using the font - Gypsy Curse.  I then cut out both of the label shapes from the file and used foam squares to pop that up to act as the stand for the easel.  I added a couple of more smaller black bats from the file to the label.  The purple plaid pattern paper is from an old DCWV The Fall stack.  
I stamped trick-or-treat from Craftin Desert Divas - Frightfully Cute Stamp set and the bat Stamp is from HOTP Halloween Small Stamp - Bats on a piece of white card stock and cut that out using one of my pierced rectangle dies.

I will be entering into these fun challenges:
Simon Says Monday: A Walk On The Dark Side
DL.ART Thankful Thursday Challenge #213 "Halloween"
CARDZ TV ANYTHING GOES CHALLENGE #16
FFC #209 Always Anything Goes
HIMCR #321- Halloween Colors!

Thanks for stopping by to see what I'm up to in my craft room today

Thursday, October 5, 2017

Flip-flaps Fall card

I bought this embossing folder (Fall Square - Darice) a while ago and have yet to use it before this card.  I recently purchased a die set that had the cool Square stitched die that leaves a folded line at the top instead of cutting out the whole square.  This embossing folder popped in my head and I grabbed it out to see if the Die would fit around the squares in the folder.  It really looked pretty close so I began creating the card front so that I could try cutting.  
The card front is card stock from recollections.  Using my spellbinders card creator die I cut the A2 size card front with that.  I then took that piece of card stock and taped it into my embossing folder centered exactly where I wanted it to be.   I then took my glue ink pad and rubbed and tapped all over the embossing folder before closing it onto the card stock I had taped inside.  After running it through my embossing machine,  I removed the tape and took my gold  perfect pearls powder and swept over the entire card with the brush leaving this beautiful gold finish on the areas that the glue adhered to.  I took a paper towel and rubbed the panel down to just leave the golden areas where it attached itself to the glue.
I then took the stitched flap die and placed it over each square and ran it through my machine  four times.  Yay!!!  I love it when an idea pops in your head and it works out just as you envisioned.  I grabbed some stamps, a sheet of gold dazzles from HOTP and a few of my spectrum noir markers  to decorate inside each of the flaps.  I wanted to do this before adhering to the front of the card  so I drew some pencil marks in the corners of each square so I knew where to place everything.
The first top square is a dazzle - squirrel, I used my markers to color in the face tail and acorn.   The second top flap I used a stamp from an old card maker set - feels like fall,  I stamped in a brown pigment ink and colored in the leaves with my markers in orange.
The bottom left square I used the same stamp set to stamp a pumpkin and the sentiment - count your blessings above it.  I used the same ink for stamping and colored with the same markers.   I also added a couple more dazzles in that square, a mushroom and an acorn.  The final bottom square I placed a hedgehog dazzle and colored in with my markers once more.
For the Inside I created the sentiment on my computer.  I cut it out with my Simon says stamp bundle of stitched shapes - Stitched rectangle die.  I added a leaf stamp using the same stamp set as I did on the front of the card.  What a fun interactive Fall card to send someone on my list.

I will be entering into these fun challenges:
Mod Squad Challenge - Color Me Fall - Rust, Gold & Orange
CARDZ TV ANYTHING GOES CHALLENGE #15
FFC #208 Anything Goes with Lawn Fawn!
DL.ART October Challenge
HIMCR #320 - Freestyle!
Die Cut Divas - October challenge

As always thanks again for stopping by to see what I'm up to in my craft room.  Have a wonderful day.

Trick or treat Mr. Pumpkin card

Using lots of new dies and a couple of old too and a cute new Halloween stamp set for the sentiment  I created this fun spooky Halloween card.
I started with a cream color card base folded at the top in the landscape style.  I used my Simon says stamp bundle of stitched shapes - Stitched rectangle die for the wavy pattern paper layer.  I cut a black mat to layer behind that and another fun Halloween polkadot pattern paper to go between the two for the opening in the center.  The papers are from DCWV.   I used  a Spellbinders Labels Twenty-Three die for the inside cut out.  It is third from the largest in that set.
The fun Mr. Pumpkin head die ... I cut several times, once in orange, once in black, once in purple.  I then trimmed and paper pieced the different colors together and cut a yellow circle that I trimmed down to go behind the Face.  I used some dark chalk to rub over the lines of the pumpkin to give shading.  I used this fabulous die set of spiderwebs to add accents on the card.  On the large web I trimmed the spider off of the web and moved it over to the left-hand side of the card.  For the purple hat band and the bodies of both of the spiders I added clear wink of Stella to give sparkle and shine.  The sentiment Trick or treat is from my newest Halloween stamp set called Happy Pumpkin Day.  I first stamped with a purple pigment ink I then stamped over that with versamark ink and then I heat embossed with clear enamel embossing powder.  I really like how that turned out.  I added some dew drops as accents and this card front is finished.
For the Inside I created the sentiment on my computer.  I cut it out with my Simon says stamp bundle of stitched shapes - Stitched rectangle die.  I added some stamps using the same stamp set as I did on the front of the card.

I will be entering into these fun challenges:
Simon Says Monday: A Walk On The Dark Side
Cuttlebug Mania - Hello Sweet Pumpkin
Scrapy Land {Challenge #75}
DL.ART Thankful Thursday Challenge #213 "Halloween"
CARDZ TV ANYTHING GOES CHALLENGE #15
FFC #208 Anything Goes with Lawn Fawn!
YNS Sketch and Color Challenge #74 - I did Sketch & Color
HIMCR #320 - Freestyle!
Die Cut Divas - October challenge
Connie Can Crop Challenge #63 - To Die For

Thanks for stopping by to see what I'm up to in my craft room this week.

Sunday, October 1, 2017

Double Z fold jumping in the leaves fall card

This is my first ever double Z fold card and I had a blast with it.   So using my Cricut, several stamp sets and one stitched die I created this fun scene.  My card base is 4 1/4 high by 5 1/2 wide to make an A2 sized card.
Main card panel - 4.25 X 11"  Score @ 2.75" & 5.5"
Strip for Z -         1.25 X 11"  Score @ 2.75" & 5.5"
Mats (2x)  2.5 X 4" & 5.25 X 4"  &  (2x) 2.35 X 3.85"  & 5.1 & 3.85"
After cutting and scoring the bottom strip to make the Z ... I attached the fence and scored where it would need to fold.  Then I attached the whole thing to the card.   I thought it would be fun to color up these hedgehog stamps and let them jump in the piles of leaves for fall.  I really had a lot of fun with the entire project.
Fall stamp on front panel – Craftin Desert Divas Simply Holidays Wordart Stamp Set
- heat embossed w/ platinum embossing powder.
Stitched Hills – Craftin Desert Divas Outdoor Landscape Dies
Fence –  Cricut paper doll dress up
Tree – Cricut  paper doll dress up
Bushel Basket - Cricut doodlecharms -  I added 4 gold metal brads I trimmed down bottom of basket for a better fit.
Leaves and acorns – Cricut doodlecharms -  acorn tops colored with Colorista - sand
Pumpkins – Witch Way is the Candy Stamp set – colored w/
Colorista Satsuma, Nectarine  Stems EB2
Hedgehogs  -  Hedgehog fun stamp set -  colored with  Spectrum Noir
Body EB1, EB2  Quills TN2, Sand, TN7  Nose IG2, Sand  Mouth IG2, Rose
Stamped Pumpkins & Hedgehogs with Walnut Stain Distress Ink

I am entering into these fun challenges:
Fantabulous Cricut - Challenge #310-Fall
Simon Says Monday: Heavy Metal
Mod Squad - Fall Colors
Simon Says Wednesday: Anything Goes
CARDZ TV ANYTHING GOES CHALLENGE #15
FFC #208 Anything Goes with Lawn Fawn!
HIMCR #320 - Freestyle!

Thanks so much for stopping by to see what I'm up to in my craft room,  have a wonderful day!

Thursday, September 28, 2017

Fall leaves Thanksgiving card

For this one I made a shaped card in Cricut design space using the frame in Cricut Ultimate Creative Sampler Cartridge.
I cut the entire card base from Ivory card stock and scored down the center to fold in half.  I used a deep burgundy red to back a pretty orange pattern paper that has a cracked vintage look to it.  I cut the three main larger leaves in fall colors from the Cricut cartridge Winnie the Pooh and friends.  Using my smallest die in the set  I cut the stitched fishtail flag banner from MFT  for my sentiment stamp.  The banner was still a little bit long so I trimmed it on the left side after I was finished stamping in the wild honey distress ink.  The Happy Thanksgiving stamp is from Celebration Scripty Sayings – Lawn Fawn.  I added a couple of plastic orange leaves with a golden metal Brad to cover the end that I trimmed.  I placed a golden metallic dew drop halfway down along the edge on either side of the card front where the design stuck out.  For the corners at the bottom I added just leaves ... at the top corners I added the scroll as well.  These are all cut from Spellbinders decorative accents, Victorian garden curved square die set.  Again I kept this card very simple and masculine for one of the guys on my list.

I will be entering into these fun challenges:
Fantabulous Cricut -  Challenge #310-Fall
Mod squad challenge – FALL COLORS
 
Thanks so much for stopping by, I hope you're having a wonderful day!

Happy Fall Pumpkin card

I decided to work on some Fall cards this week.  This one is simple and fun with lots of texture.  I cut a standard A2 size card out of Kraft card stock for a landscape style card that folds at the top.  Using lots of fall colored papers from my scrap bin and following a sketch & color challenge over at YNS... this is what I came up with.
Happy fall embossing border folder - Darice.  I cut that out with a stitched fishtail flag stax die from MFT,  I then put the fishtail and back into the die to cut it off straight cutting off the embossed Y'all with leaves too so that I could have stitching all the way around  in a rectangle shape in the size I needed.  I ran the gold section of card stock through my leaf swirls embossing folder which is also from Darice.  I cut the label out twice once from Kraft card stock and then from the golden pattern paper to layer on top.  This was cut from the spellbinders labels Ten die.  The pumpkin is from Cricut CM cheerful seasons cartridge.   I used an orange pattern paper for the pumpkin that has like a cracked paint look to give it some texture too.  To accent the label I added gold metallic dew drops to the center on either side.   For the other four spots that the label sticks out I added some golden dew drops there as well.  I accented each of the top corners of the Happy Fall banner panel with two golden yellow leaves I found in my stash that were cut from spellbinders decorative accents, Victorian garden curved square.  I kept this card very simple and masculine for one of the guys on my list.

I am entering into these fun challenges:
Fantabulous Cricut -  Challenge #310-Fall
Mod squad challenge – FALL COLORS

Thanks as always for stopping by to see what I'm up to in my craft room!   I hope you have a great day .

Wednesday, September 27, 2017

Snowflake Kisses card

If y'all haven't noticed by now... my favorite color is purple!   Pink is a close runner-up though lol.  I am really happy how this Christmas card turned out, it is perfect for my BFF because purple is her favorite color also.
I used an A2 sized card base - portrait style, fold at the top that I cut from heavyweight white card stock.  For the purple embossed panel... first I embossed with my Darice snowflake swirl embossing folder.  Then I used my Simon says stamp bundle of stitched shape dies using the largest rectangle to cut that panel out.  After that I used my MFT stitched scallop basic edges 2 die set to cut the fancy edge on the bottom.   
I also cut a similar size craft foam sheet to use as a backer to pop this whole panel up.   For the beautiful snowflakes I took a foil baking sheet and attached it to a heavyweight  card stock with a scotch glue stick  to repurpose it.  I used various snowflake dies to cut out four different snowflakes.  For the largest one I left all of the little innie pieces inside.  Two of the four snowflakes I colored with my spectrum noir PL4 marker to really make the snowflake stack pop and bring the colors all together!  I used glue dots instead of foam to layer them all up so the stack didn't get too thick.  I added a large purple dew drop to the center.   I thought this sentiment stamp, Snowflakes are kisses from heaven would be perfect for this card... I stamped with a purple heliotrope pigment ink and then went over that with VersaMark ink.  Then heat embossed with clear enamel embossing powder.   I added a few more smaller purple dew drops as accents near the bottom.
For the inside I used the same Simon says stamp bundle of stitched shapes rectangle that I inked the edges of with the purple heliotrope ink then I attached the bottom section of the panel cut from the front to the very bottom.  I used  another sentiment  from that same stamp set that I used for the front this time saying there's Snow friend like you,  using the same purple heliotrope Ink.  I took the center of the top snowflake from the front and placed it as the dot over the i in friend.   I stamped another sentiment underneath that says wishing you a merry Christmas in a darker purple violet pigment ink,  that one is from Inkadinkado penguin pandemonium stamp set.

Thanks so much for stopping by to see what I'm creating in my craft room this week.

I am entering into these fun challenges: 

Tuesday, September 26, 2017

Snowflake Slider card

This is another fun SVG card file from www.creativekuts.com that she will be offering as part of her November card train cargo.
I used a very light purple recollections card stock for the portrait card base that I folded at the top.  The pretty blue plaid with the purples and different blues in it plus the purple plaid for his cap & scarf and the snowflake paper on the slider layer are all from an old 4X6 Christmas paper stack that I got from Oriental trading Company years ago.  For the blue plaid layer I used my stitched rectangle die to cut that and it is from Simon says stamp bundle of stitched shapes.  The SVG file of course has a cut for that layer if you would like, I just happen to really like the stitched look on my cards when I can.  For the slider Layer I ended up using a dime instead of a penny because it was kind of a tight fit next to the edge of the track.  I also of course added lots of foam tape behind the snowflake panel to give the room needed for the slider mechanism inside to run freely along the track.  I sprayed both of the snowflake pieces with a sticky adhesive and then covered with a fine white glitter.  Then I added a little bit of purple glitter to the top snowflake before I adhered them together with foam tape.  I added a pretty purple dew drop for the center of the snowflakes.  What an adorable little snowman... the shirt paper is from DCWV scraps I believe.  For the snowman's lower body, hands, fur trim and ball on his cap I added clear wink of Stella glitter marker to all of those pieces for a nice sparkle and shine.   The adorable face is from Peachy Keen stamps - Basic Paper Dolls.  I added some peach colored chalk to the cheeks and dotted white gel pen in the eyes.
For the sentiment tag I stamped the sentiment "A snowflake is winter's butterfly" from a new Christmas stamp set that I recently purchased.  I really like that sentiment!   I used my embossing buddy over white card stock and then first stamped with a Pigment Violet purple color box cats eye ink.  I then cleaned my stamp and then inked up with clear versaMark & using my stamping tool I stamped exactly over the same spot.   I then used clear enamel embossing powder & then Embossed with my heat gun.   I love love love how this purple embossing turned out.
For the inside of the card I used my Stitched Scallop Basic Edges 2 die to cut two strips out of the matching blue plaid paper.   I used my Simon says stitched rectangle again for the white Layer,  then I added the stitched scallop blue plaid strips to the top and bottom and trimmed off the excess on either side for each piece.  I stamped the sentiment in the lightest purple (Heliotrope) to match up with the base of the card ... that stamp set is from a card maker kit from years ago I believe.  I also used a snowflake stamp from that same set first stamping in a light blue that matched with some colors in the card.  For that one I pushed kind of hard on the stamp.  I then lightly stamped over in the light purple with the same snowflake just barely kissing the first stamping and it gave it a nice purple inner layer.  I used one of my stitched scallop oval dies to cut out the sentiment and then inked the edges in the lightest purple (Heliotrope) before popping up on foam dots on one half and adhering over the slider layer then added my snowman in the same manner. 

I really had fun with this card, I love making and giving inneractive and different cards than just the normal.   Thanks again Cheryl for another fun card file.

I will be entering into these fun challenges:
Simon Says: Pop It Up
CARDZ TV ANYTHING GOES CHALLENGE #14
FFC #207 Anything Goes
DL.ART September Linky Challenge
HMCR #319 - Any Holiday!

Thanks again for stopping by today,  would love to get your comments ... I always love reading them!

Sunday, September 24, 2017

Grateful for you pumpkins fence card

Hello crafters.  Cheryl over at www.creativekuts.com sent me this awesome SVG card file and I went crazy and had a blast with it.
Originally I planned to put the pumpkin basket on the front of the card on the fence but the fence turned out so spectacular after I embossed it with the crafters companion wood grain folder,  which I added walnut stain distress ink directly inside folder before embossing Kraft card stock... I really didn't want to cover it up!  So instead I created a sign with one of my stitched ticket dies and stamped grateful for you from Crafters Companion -  Autumn Morning coordinating  Stamp Set.  I pierced a hole in each corner and added some  Brown and white bakers twine to hang the sign over the fence and attaching in place with glue dots under the sign.  I used one of the sunflower cuts from the card file to decorate here plus added an extra green swirl under it from a spellbinders die set.   For the pumpkin basket panel which is part of the SVG file that all layered together fabulously.  I love how easy it was with the outlines of the pumpkins in the basket very very easy to piece together.   After adhering the three main pieces together I then found some pretty gold foil accented Scraps and cut the bands  for the basket.   I used six large Brad's and popped up the bands with strips of craft foam I cut to fit under them.  I then attached the swirly leaves and the pretty sunflowers which I added gold perfect pearls to the flower centers including the center of the one on the fence.  
For the next three panels inside I used some of my dies to create pretty frames.   The large center frame and the matching one on the left panel are from Spellbinders Decorative Accents Victorian Garden Decorative Curved Square Dies.  The one on the right is from Spellbinders Labels Twenty-Three die set, I cut that out of a matching pattern paper and I created a shadow layer out of Kraft  card stock with my SNC2.   I used the small accent spellbinders die from Victorian Garden  to add the little green leaves and swirls everywhere.  I also took more of the gold perfect pearls and painted over the large kraft leaves on both of the spellbinders frames to add even more shimmer and shine.  
Both of the Stamps on the inside frames are from Craftin Desert Divas -  The left panel is from Craftin Desert Divas Hey Pumpkin Stamp Set and the right is from Craftin Desert Divas Simply Holidays Wordart Stamp Set.    All of the stamps are done with a brown pigment ink.
The pattern papers I used for all the panels are two different sheets from the 12 x 12 stack The Sasha Collection by Prima. 
I really love how the recipient of this can display it in several different ways completely stretched out like this or with the pumpkin panel and Fence showing like shown in my second pic above!  What a really fun cool card design.  Thanks again Cheryl for letting me play with this awesome file.

I am entering this card into these fun challenges:
Mod Squad Challenge - Leaves 
Simon Says: Pop It Up
CARDZ TV ANYTHING GOES CHALLENGE #14
FFC #207 Anything Goes
Cuttlebug Mania - Golden Harvest
DL.ART September Linky Challenge
HMCR #319 - Any Holiday!
Scrapy Land {Challenge #74}
Simon Says Monday: Shimmer and Shine

Thanks again for stopping by to see what fun I'm having in my craft room today.

Friday, September 22, 2017

Bee & Flower Easel Card

I created this card based on a sketch over at YNS.  
I decided to make it into an easel card after I finished the complete front.
I have been on a mission lately to use up some of my scraps so that is what I did for this card I went through my scrap boxes and found some papers that I thought looked good together.   I used one of my stitched flag banner dies for the pink Layer that I trimmed down to 5 inches long.   I used a stitched scallop oval die for the center mat and I made a shadow layer for it in black with my SNC2.
The Bee is an adorable SVG file from Cheryl over at creativekuts.com   I used some yellow shimmer chalk on the middle section of the bee to help accentuate his curved body lines.  I used a mini punch for the tulip the Bee is holding, I cut it twice once in green and once in pink and trimmed off the stem and layered the pink tulip on.  I punched one more tulip flower in red  and trimmed away everything but the leaf area to make the mouth for the bee.   From some of the same card stock that I used for the first card base layer I  stamped the word hello from a crafters companion Hexagon coordinating stamp set which I then cut out with a stitched ticket die and popped up on foam squares.
On the inside I cut another stitched mat  from the same ticket die set in a larger size this time after stamping like the flower & bee great friends are we  from desert Craftin divas - Lil Bit Buggie Stamp Set.  I then added some bling below the sentiment, One pink flower shaped rhinestone and too mini pink rhinestones to go on either side of the flower.   I popped that label up as well on foam tape to act as the holder for the Easel card.
I cut a yellow Mat with a pierced rectangle die so that I may add a written sentiment later on the inside.

I am entering into these fun challenges:
Sketch and Color Challenge #73 
Simon Says: Pop It Up
CARDZ TV ANYTHING GOES CHALLENGE #13
FFC #207 Anything Goes
Cuttlebug Mania - Golden Harvest
DL.ART September Linky Challenge

Thanks for stopping by today to see what I'm up to in my craft room.

Thursday, September 21, 2017

Stitched Banners Masculine Birthday Card

Last week was our anniversary, this week is hubby's birthday.   I wanted to make him a simple masculine card which is so very hard for me to do lol.
For the base of the card I used recollections Kraft card stock and cut at 4.25 X 5.50  portrait style card with the fold at the top.  For the next layer are used a light blue bazzil card stock and used my Simon says stamp bundle of stitched shapes - using the largest stitched rectangle die.   For the stitched banners I used two different sizes from that die set. I cut 4 in the 1.5" wide size  which I pulled scraps of paper that I thought went well together from my blue Scraps stash and I cut one in the 1" width size from Kraft card stock that I ran through my Cuttlebug  Candy cane stripes embossing folder.   I inked all of the edges with walnut stain distress inks. After adhering  all of the flag banners leaving the ends free so that I could curl them up, I added a brown ribbon with  Blue stitching.  Next I used  to circle stamps from 2 different die sets, the smaller solid one cut from Kraft  card stock I used my HOTP scallops and circles set.  I believe I use the smallest circle and then stamped it with cards TV going in circles stamp set - The happy birthday stamp.   Then I cut the larger stitched circle that From light blue bazzil card stock using the Simon says stamp bundle of stitched shapes -  using the larger of the two stitched circles from that set.   Are used foam tape on either side of the ribbon to attach the blue circle sentiments.   I ran some brown and white bakers twine through a blue button which I attached with the glue dots onto the center of the sentiment circles.   I used my piercing tool to curl up the ends of the flag banners.  And finally I stamped for someone special from HOTP birthday greetings stamp set  in a brown pigment chalk ink.
On the inside of the card I used some of the same die sets as the front and some of the same pattern paper is used with the addition of a solid blue to back the whole thing and I also used a pierced rectangle die to cut the ivory sentiment rectangle stamping that  with a fun sentiment from HOTP birthday cheer stamp set  using a brown pigment ink.

I am entering into these fun challenges:
Simon Says Wednesday -   Pop It Up
CARDZ TV ANYTHING GOES CHALLENGE #13
FFC #206 Always Anything Goes
Die-Cut Divas - September Challenge - Masculine/Men/Boys
DL.ART September Linky Challenge

I hope you enjoyed my card today, thanks for stopping by to see what I'm up to in my crafty space.

Wednesday, September 20, 2017

Written on the Tree Anniversary Card

What a fun simple masculine card!  I was inspired by one similar on Pinterest and thought it would be perfect for Hubby's Anniversary card this year.
For the card base I used some Recollection's teal blue card stock cut at an A2 size .   Next I cut a stitched panel out of kraft card stock with my Simon says stamp bundle of stitched shapes using the largest rectangle.  I then took that stitched panel to my Cricut Explore and set it up to write the words where I wanted them to be  with a black Cricut pen.   The fonts are from my computer.  Then I took the panel to my die-cutting machine and used a stitched heart die to cut out the words.  Next I took the other part of the panel and placed it in my Wood Grain Textures embossing folder by Crafters companion that I had already rubbed  Walnut stain distress ink directly to the folder.  I really really love how this embossing turned out.  I took the same ink around the edges of everything before it adhering everything together.   I wrapped some brown and white bakers twine three times around the Wood panel before adhering it to the teal panel.   I cut a couple of different button die-cuts, the stitch circle in brown the other in the teal blue.  I also cut a heavier backer to go behind the teal.  I tied a knot in the three layers of twine running across the card and then ran it up through my buttons to tie a knot there.   I tucked in some foam tape behind the teal button to give it some dimension.   I stamped the word forever on a small banner diecut to slip under the button with foam tape added to it as well.
For the inside I cut another stitched rectangle panel after printing out the sentiment I created on my computer.  I used walnut stain distress ink to go around the edges of that panel before I adhered it.

I made an envelope out of the same teal blue card stock, Neither of them look like the true color in these pics lol...using my 123 envelope punchboard from WeRMemory Keepers.  On the front I added two different Heart diecuts from the same set as before out of Kraft card stock. The stitched one, I had the Cricut Explore write on first.  Then on the back flap of the envelope I use the same Lacy heart die to simply emboss into the paper instead of cut.

I am entering into this fun challenges:
Simon Says: Pop It Up
CARDZ TV ANYTHING GOES CHALLENGE #13
FFC #206 Always Anything Goes
Die Cut Divas - September Masculine/Men/ Boys
DL.ART September Linky Challenge

Thanks so much for stopping by to see what I'm up to in my craft room this week.

Monday, September 11, 2017

Watercolor Roses Thank You card

I had no idea where I was going with this card other than the fact that I wanted to try out the no-line water coloring technique.  So I started out with a Tim Holtz watercolor paper card front in an A-2 card size.   I stamped the image  from  HOTP watercolor roses stamp set in the lightest distress ink color that I own which is old paper.   I then used other distress inks in two shades of pink and a green to watercolor my image in.

After the water coloring was finished and dried I decided instead of fussy cutting around the image I would just use the whole panel and I decided to cut it down with the pretty edgeables lattice Flourish die from  crafters companion.  I really liked how that turned out then I went and searched my stash and found a scrap of some pretty watercolor pattern paper in pink and green stripes.   I stamped "thank you" from the same HOTP watercolor roses stamp set before adhering the two layers together.

I took the other piece of the watercolor paper that was left over after diecutting and painted it all over with the same pink watercolors.   I then took my cheery Lynn exotic butterflies and die-cut from that water colored panel the 3 butterflies.   After adhering the butterflies down I simply added some green and lilac dew drops to accent and finish off my card.

I will be entering into these fun challenges:
Mod Squad Challenge - Lose the Lines
HIMCR #317 - Super Scrap Saturday!
DL.ART September Linky Challenge
Scrapy Land {Challenge #73}
Cuttlebug Mania - Anything goes with die cuts and/or embossing
Simon Says Wednesday: STAMPtember® Stamp It

Thanks for coming by to check out what I'm up to in my craft room.

Sunday, September 10, 2017

Feels Like Fall Leaves Card

Based on a fun challenge, I created this Fall card.  I decided to do both the color and the sketch with this card... Thanks YNS for the awesome fun challenge... so glad I recently found your site!!!
I embossed the base layer of the card with the basket weave folder by Darice, plus I inked the edges with brown pigment ink.  Using my spellbinders labels Twenty-Three dies I cut out the two pattern paper shapes from my Fall scraps... I then used my SNC2 to cut out a brown shadow layer for each shape.  I used one of my button dies that came in a set of six to cut out the three buttons in different Fall colored scraps of card stock.  I then used my SNC2 to cut out a brown shadow Layer for those as well.  Before adhering them together I ran brown and white bakers twine through the button holes and tied a knot for each.  I used two different leaf dies that I also dry embossed and sprayed with glimmer mist to bring out the embossing in a shimmery copper tone.  For the stamping I used an old stamp from a cardmaker set I believe and colored the leaves in with my spectrum noir markers, after backing with the brown shadow Layer I popped the sentiment shape up on foam squares.
For the inside I found a piece of Fall leaves pattern paper in my Fall Scraps bin and used the same spellbinders die as the front to cut it out.  I used brown pigment ink to ink around the edges.  I decided to do my stamping directly onto the green leaf inside and used stamps from Desert craftin divas - Hey Pumpkin stamp set.  I stamped both sentiments in a brown pigment ink.  I then stamped the autumn greetings again over the top of the brown with wild honey distress ink using my presicion stamp press from we R memory keepers.

I will be entering into these fun challenges:
Simon Says Monday: STAMPtember® Stamp It
Scrapy Land {Challenge #73}
YNS - Sketch and Color Challenge #72 –
Simon Says Wednesday: STAMPtember® Stamp It
CARDZ TV ANYTHING GOES CHALLENGE #12
FFC #205 Always Anything Goes
HIMCR #317 - Super Scrap Saturday!
DL.ART September Linky Challenge

Thanks for stopping by my craft room to see what I'm up to today.

Saturday, September 9, 2017

3D Roses Birthday card

I decided to make some 3-D roses from one of my diecuts today.   It's been along time since I've tried this technique... I always love the outcome.
For each 3-D flower I cut two flat flowers and then trimmed petals out of them as you see in the picture.   The first one I trimmed out one petal, the second one I trimmed out to petals.    I inked the top edges and then rolled them together and adhered the sides forming like a cone for each.   I used my piercing tool on the edge to curl the outer petals to give more dimension.   Then you simply start stacking them together starting with the smallest and putting it inside the next and gluing them all together.   I did this three times to create the three different flowers.
For the main card layer I used a purple that was already embossed card stock.    I used two of my postage stamp dies to cut the black postage stamp shapes in two different sizes.   I measured the inner part of the rectangles so that I could add a rectangle on top of each.   I used my SNC2 to cut out those Straight rectangles, one out of a pattern paper from Recollections - all girl stack &  The other out of plain white paper for stamping.  I stamped happy birthday from HOTP - birthday cheers stamp set with Memento Tuxedo black ink\,  I then colored in the word birthday in with my Spectrum Noir marker LV2.  Under the roses I placed a purple Star flower cluster diecut from Sue Wilson.   I used my hot glue gun to attach the 3-D roses onto the card,  I then sprayed the entire card front with perfect pearls mists – interference red ... which is more of a pink tone really.  I also sprayed the  happy birthday stamped diecut with the same perfect pearls mists.   I then ruffled the corners of the white rectangle to give it a more worn-distressed look.   I used foam tape to pop up that entire smaller postage stamp shape.   Below that I added three glittery black enamel dots.
 For the inside I cut two more of the same postage stamp shapes one in white for stamping the other in the same pattern paper as the front.   I inked both shapes edges in a light lilac color.   I stamped wishing you a beautiful day from HOTP – Lacy things  stamp set.  I die cut a flower from the star flower clusters Die set,  only this time I just cut the flower that I didn't use before and not the entire cluster.   I stacked and adhered the three layers for the flower and then added the same glitter enamel dots for the center.

I am entering into these fun challenges:
Simon Says Monday: STAMPtember® Stamp It
Sketch and Color Challenge #72 – (I Chose Sketch)
CARDZ TV ANYTHING GOES CHALLENGE #12
Scrapy Land {Challenge #73}
FFC #205 Always Anything Goes & 2 Sponsors!!
Challenge #80 - Die Cut Handmade Flowers
Connie Can Crop Challenge #62 - Anything Goes

Thanks for stopping by today to see what I'm up to my craft room.

Friday, September 8, 2017

Smile to my Heart card

 I needed to make a thank you card for some very special   Family members that hosted a family event at their home.   My design layout is based on a sketch challenge over at your next stamp,  this is my very first time playing along in their challenge how fun!
For my card base layer I used a deep purple card stock from Recollections.   The next base layer I cut with Simon says stamp bundle of stitched shapes - rectangle die  on a light purple card stock again from Recollections.   I then ran it through my cuttlebug D'vine Swirls embossing folder.   Next I found some Scraps in my purple scrap bin that I cut with 2 different sized cross-stitched flag banner dies.  The pattern one is from Deja-view global treks I think and the solid that I stamped my sentiment on is from Bazzil.  I did some no-line stamping with my HOTP layering dahlias stamp set,  stamped in different purple inks and then cut out with my SNC2.  I use micro mini purple beads for the center of the top flower.  I backed the two flowers with a diecut I cut out in black card stock called Mini Fanciful Flourish - Cheery Lynn.   I stamped you brought a smile to my heart from HOTP thank you stamp set, stamped in Memento tuxedo black ink.   I added three purple rhinestones at the bottom as accents.
For the inside I used the same stamp set to do the no-line stamping dahlia flower. The white panel is again cut with the Simon says stamp bundle of stitched shapes - rectangle die. The sentiment Is there no limit to your awesomeness? Is again from the HOTP thank you stamp set,  which I stamped in purple.   Then I stamped thanks a bunch in Memento Tuxedo black ink from HOTP flower frenzy stamp set.

 I will be entering into these fun challenges:
Simon Says Monday: STAMPtember® Stamp It
Scrapy Land {Challenge #73}
Mod Squad Challenge - Lose the Lines
CARDZ TV ANYTHING GOES CHALLENGE #12
FFC #205 Always Anything Goes & 2 Sponsors!!
Sketch and Color Challenge #72 – Additional Inspiration (Sketch)

Thanks for stopping by to see what I'm up to in my craft room today.

Wednesday, September 6, 2017

Scarecrow wobble card

I am on quite a roll with these wobble cards.   Here is another Svg file from Creativekuts.com that I cut with my Cricut Expression.   The sign is down lower than it should be because I messed up and put all of the hands and arms together before I added the clothes and sign,  so I had to do a little work to pry the fingers up and get the sign under there as best I could  ðŸ˜‚  You may not of even noticed that if I didn't tell you.  
I like the little card base she has created for these cards because they rock back-and-forth also.   For the Layer behind him I used a cute pattern paper with different types of squash all over it as I thought that was fitting for the scarecrow to protect.   For making the scarecrow I used many fall colored pieces of scrap paper with lots of inking on the edges.   I used a white gel pen to add stitching to his pocket on his overalls and then to the patches on his elbows and hat.   I used a treasure face stamp from set #2 - Treasure Box Designs with brown pigment ink to stamp his face,  before stamping I used a wet Q-tip to remove the ink off of the nose portion on the stamp.   After stamping I placed the die-cut nose that came with this SVG file.   For some reason I had a very hard time using my white gel pen to add accents to the eyes, I'm not sure if it was the type of card stock I used or the pigment ink but it just did not want to work.   I finally dug out some of my white fabric paint and dotted just a small bit in each eye to give the accent.  I used the happy fall y'all stamp from Craftin Desert Divas - Hey Pumpkin stamp set.   I stamped it once in brown pigment ink and then again with walnut stain distress ink.   That way I got the darker color with the crisp clean lines.
For the inside I cut the inner layer out of an Ivory card stock,  I inked the edges with walnut stain distress ink.  I stamped thankful thoughts of you in brown pigment ink that is from the same stamp set from Craftin Desert Divas – hey pumpkin stamp set.   The happy Thanksgiving stamp I used walnut stain distress ink on top of the brown pigment ink and that is from the Celebration Scripty Sayings stamp set from lawn fawn.

Here is a little video showing the action wobble in action lol


 I will be entering into these fun challenges:
CARDZ TV ANYTHING GOES CHALLENGE #11
HIMCR #316 - Fall Colors!
DL.ART September Linky Challenge

Thanks so much for stopping by to see what I'm up to today in my craft room