Pages

Friday, September 30, 2016

If the shoe fits Witch Cut-Away Card

I am making up cards for my Friend Cheryl @ Creativekuts.com this week with her awesome Card files.  She will be offering a deal tomorrow on FB.  You can go check it out HERE if you are interested. (Please Tell Cheryl Eva Sent you)
This was such a fun card to paper piece together & make and I love how it went perfect with my sentiment stamp.  Also I don't know if you can tell very well that it is a cut-away card so the front edge of the card is that broom shape...so cute!

Card file - Creativekuts.com
Card base - Recollection's Black card stock
Pattern papers card layers - Unsure...Maybe K&Co
Papers embellishment Paper pieces - Recollections
Inking around edges of all pieces -  Martha Stewart Powder blue ink
Sentiment Stamp - HOTP Witch Small Stamps
White Embossing Powder - Ranger Super Fine Detail
Tree Embossing - Crafters Companion, Wood Grain texture folder
Foam tape - from my stash

Inside stamped witch - HOTP Witch Small Stamps
Inside stamped sentiment - Craftin' Desert Diva's, Frightfully Cute
Memento tuxedo black ink
Inside die-cut -  Spellbinder's Opulent Ovals die
Inked edges - Walnut Stain Distress Ink

I will be entering into these fun challenges:
CARDZ TV ANYTHING GOES DESIGNERS CHALLENGE #1
Simon Says Stamp Monday - Powder Power
HIMCR #268 - Any Holiday!
Jo's Scrap Shack - FFC #158 "Cut it up" With a Twist!
Little Scrap Pieces Show It Off Linky Party

I hope you enjoyed my Project today.  Thanks for stopping by!
Happy Crafting!  Eva Scraps


Thursday, September 29, 2016

Fall Pumpkin pop up card

What a cool card cut this is for Fall or Halloween from Cheryl over at Creative Kuts
What's more is it is just the card base cut and the 3-D pumpkins and a background layer in this  file everything else you decide what you want to add.   This will definitely be a go to card file in my stash for fall and Halloween.   As a matter of fact I think I will be making a Halloween version of this card later today.
In the far background I used a falling leaves die-cut from spellbinders that I had inked up with my distress inks as watercolors.   I also created the brown frame to go around that and I did a border strip in the same color with a Victorian edge cut at top and bottom.  The single leaves are from crafters companion also inked up with Distress inks.   The adorable bear with the pumpkins stamp are from Desert Craftin Divas that I colored with my Spectrum Noir markers  and cut out with my ScanNCut2. The sentiment is also from that same stamp set which I stamped in brown pigment ink onto a spellbinders labels 20 die-cut that I had inked up with old photo distress ink and walnut stain around the edges.  For the pumpkins that I inked the edges of each piece in walnut stain distress ink first, then I layered them up with no glue and ran them through my D'Vine  Swirls Cuttlebug folder layered exactly how I wanted them to be at the end.  I then added foam tape between the layers of each pumpkin lining up the swirl marks as I placed them.


I am entering into these fun challenges:
Die Cuttin' Diva's - Challenge #285 ~ Vegetables
Little Red Wagon - Challenge # 361 - Bear With Me
Simon Says Wed: Anything Goes
Mod Squad Challenge - Falling Leaves
DL.ART Thankful Thursday Challenge #189 "FALL"
Die-Cut Diva's - September Challenge - Fall
Work it Wednesday September 2016 - Fall Colors
Craftin Desert Diva's on FB - #CDDMONTHLY

Thanks for stopping by to see what I'm up to in my craft room today hopefully I'll have a couple more cards to share with you later this afternoon.

 Have a wonderful and crafty day!
 Eva Scraps

Ice Skate Cut-away Card

Another Christmas Card to share with you all but today it is a Beautiful Cut-Away Card.  I am in love with this Hot Off the Press die set to cut away a flap for the card.  It is actually called Card Flaps and Borders Cutting Dies.  I have a Stamp set that coordinates with it but it is not Christmas and I opted to not use it on this one.  This is only 1 of 4 in the set...Wowzers I can't wait to make some more cards with the other cuts!!!
So the inspiration for this entire card was the Pretty Ice Skate stamp which is also from HOTP.  After finding the Christmas papers I wanted to use I dug out some old lavender and blue paper scraps for the die cuts.   I stamped the skate in versamark Ink and used Dutch blue embossing powder and set it with my heating tool.  I love how that turned out!   I then took it to my scanNCut 2 not knowing if it would recognize the embossed image but much to my surprise it did so I set it to give a .08 outline and cut.  I then diecut some snowflakes in the coordinating papers although I couldn't find the right color blue for the top snowflakes, so I decided to completely cover those in the matching in Embossing powder and heat set them.  I added a foam dot in between the layers of snowflakes and then added an enamel glitter dot to each.  I diecut a fancy oval and then ran it through my Swiss dots embossing folder.   I added the diecut ice skate on foam tape in the center of the oval and then added a light lavender gem in the center of the snowflake on the boot. I added some similar lavender gems along the fancy cut off edge plus one large white glitter dot in the center.
For the inside I covered with the blue paper, I then added the cute pattern paper which I had first cut with a Victorian edge with my paper cutter.  I used 2 oval dies from that same die set.  The sentiment is my favorite for the inside of my Christmas cards.  the snowflake stamp is from the same Ice Skate Small stamp set on the front.

List of materials:
Designer Papers - OTC
Solid Cardstock - Recollection's
Fancy Card Flap - HOTP Card Flaps & Borders Cutting Dies
Ice Skate & inside Snowflake stamp - HOTP Small Ice Skate Stamp
Small Heat Embossed Snowflakes - My Craft Spot Die, Snowflake Border & Dies
Embossing Powder - Dutch Blue
Large lavender Snowflakes - Die-Versions Sweet Petites - Snowflake
Fancy Oval Die cut - Spellbinders Nestabilities Majestic Elements Die - Opulent Ovals
Dry Embossing - Cuttlebug Swiss Dots
Sentiment stamp (inside) - Inkadinkado Cool Christmas Stamp Set
Bling: Gems, Enamel Dots and Glitter dots - all from my stash

I am entering into these fun challenges:
MY SHERI CRAFTS CHALLENGE #191 - Christmas w/ 3 or more dimen embellies
Simon Says Stamp Monday - Powder Power
HIMCR #268 - Any Holiday!


Thanks for stopping by to have a look at what I am up to in my craft room, hope to see you again real soon.

Have a wonderful and crafty day!
Eva Scraps

Tuesday, September 27, 2016

Hohoho dryer sheet card

 OK I couldn't just do one as I knew of course so here is another dryer sheet card.

I wanted this one to have a vintage feel to it.  This time the stamping is done in brown pigment ink.   The red hohoho in the center is a rub on,  I am really trying to get those out and use them more.   That beautiful imagery stamp set is from Crafters Companion - Sheena Douglas Christmas.  Using my blending tool I used old paper distress inks to Ink around the edges. 
I again used the Elmers craft bond and spray adhesive to attach the used dryer sheet.   I then ran it through my big shot to cut the layers down with the rectangle from  Simon says stamp – bundle of stitched shapes.   Then I sprinkled with the extra fine crystal diamonds glitter.  To the left I added some cute green enamel glitter dots  and on the right a cute little tag that I heat embossed Merry Christmas on in an extra fine white  embossing powder.  The tag is from Simon says stamp bundle of stitched shapes.   The merry Christmas stamp is from my craft spot - tiny tags Christmas.


List of materials:
Nena white heavy weight card base
Green textured card stock from my stash
White recollections card stock
Trees stamped twice along the bottom - Crafters Companion - Sheena Douglas Christmas
Santa & Reindeer - Crafters Companion - Sheena Douglas Christmas Stamp set
Used dryer sheet
Stitched Rectangle Die – Simon says stamp bundle of stitched shapes
Elmers craft bond spray adhesive – to attach dryer sheet
Extra fine glitter – Sulyn brand, crystal diamond  (found at Walmart)
Three green enamel glitter dots 
Stitched Tag - Simon says stamp bundle of stitched shapes
Versamrk Ink
Ranger - Super Fine White Embossing powder
Merry Christmas Stamp - my craft spot - tiny tags Christmas


I am entering into these fun challenges:
MY SHERI CRAFTS CHALLENGE #191 - Christmas w/ 3 or more dimen embellies
Simon Says Stamp Monday - Powder Power
HIMCR #268 - Any Holiday!
Jo's Scrap Shack - FFC #157 "Anything Goes"



Thanks for stopping by to have a look, hope to see you again real soon.

Have a wonderful and crafty day!
Eva Scraps

Cardinal Christmas dryer sheet card

 I have only ever made a dryer sheet card once and I enjoyed the outcome so I thought I would make a few this year  for my Christmas card list.  

I started with an A2 size piece of white card stock knowing that I would be cutting it down later for my front card layer.   I used a few different stamp sets to create this one a little bit of coloring with my Spectrum Noir markers, some inking around the edges with walnut stain distress ink, the dryer sheet and lots of sparkle.  It is so hard to capture all of that beautiful glitter in a picture .... I sure wish you could see it in person, it's really something!


List of materials:
Nena white heavy weight card base
Red recollections card stock
White recollections card stock
Pine sprigs around the edges – InkaDinkado Cool Christmas  stamp set
Holly leaves branch - I kadinkado cool  Christmas stamp set
Bird - HOTP  Cardinal small stamp set
Used dryer sheet
Stitched Rectangle Die – Simon says stamp bundle of stitched shapes
Elmers craft bond spray adhesive – to attach dryer sheet
Extra fine glitter – Sulyn brand, crystal diamond  (found at Walmart)
Three red gems

 I am entering into these fun challenges:
MY SHERI CRAFTS CHALLENGE #191 - Christmas w/ 3 or more dimen embellies
HIMCR #268 - Any Holiday!
Jo's Scrap Shack - FFC #157 "Anything Goes"

 Thanks for stopping by to have a look Hope to see you again soon.
 Have a wonderful and crafty day!
 Crafty hugs, Eva Scraps

Monday, September 26, 2016

Harley Birthday Card

 Hello my crafty friends, back with another birthday card to share with you.   I have four guy birthdays coming up in December and I always struggle with masculine cards so I thought I better get started early this year.    This card is following Mary's card sketch #3 over at cardz TV. This one will be for my brother Sonny he just bought himself a Harley Davidson motorcycle last year and yet this is far from a Harley I thought it looked pretty cool after I added some cool details and tweaks.
The motorcycle is from Cricut - Happy Father's Day cartridge.   I cut the two layers it offered on the cartridge as normal... the top one being in recollections black and the layering layers that go behind I did in a different textured black card stock.   I then I added clear embossing powder to the tank and fenders layers,  it really came out with a cool Glossy textured effect because it was on textured card stock to begin with.   Then I cut a complete blackout layer to go behind everything in a reflective silver card stock  to add all the awesome chrome look to the bike.   I also cut the seat section out of the textured card stock but I didn't add the embossing powder to it.   And one last final touch I did to the bike is on the very front part of the headlight I added glossy accents to make it look like a glass lens.

 Both of the label and banner die-cuts are from spellbinders but on each one I hand drew the inner section of the die and hand cut to give it a layered look.   After I adhered the polka-dot one I put it back in the die and ran it through with the embossing Mat to really let it pop  and mold to the shape.
For the word banner I added an old happy birthday rub-on from my stash.  I have a trick for making rub-on's attach easier in case anyone doesn't know this:   I cut the rub-on to fit the gray piece of paper,  I layered my die-cutting machine up as if I would be embossing only instead of putting the grey paper with the rub-on on top of it inside the embossing folder I laid it underneath the embossing folder and ran it through.   In most cases this gives enough pressure that the rub-on sticks to whatever you're attaching it to .... sometimes however you still do have to do a little rubbing as I did with this one just on the very ends though.  My Rub-on's are very old,  not sure if that makes a difference.   So once I had the rub-on attached to the gray piece of paper I inked the edges with walnut stain distress ink and then I adhered it to the embossed banner.   Both the motorcycle and the word banner are popped up on foam tape.   Plus I added 3 Grey enamel dots to the left bottom corner.

Card Base Layer in a grey rivot paper -  cut with spellbinders card creator die
4 X 5.25 layer in black recollections – Simon says stamp, Bundle of stitched shapes
Top section silver reflective layer - embossed with Cuttlebug diamond plate folder
Bottom section  diagonal striped star card stock  - Pressed petals, punk paper stack
Gray polka-dot paper – from my stash
Motorcycle  - Cricut  father's Day cartridge
Label – spellbinders labels 20
Word banner – spellbinders ribbon banners


 I will be entering into these fun challenges:
CARDZ TV DESIGNERS CARD SKETCH CHALLENGE #1 BIRTHDAY
Cut It Up Challenge - Challenge #105 - Name Game  Eva= Letter E - Embossing & Enamel Dots
Scrapy Land -  #50 Happy Birthday!
Simon Says Stamp Monday - Powder Power  Embossing Powder on bike tank & Fenders

Thanks for stopping by to see what I'm up to in my craft room, hope to see you again soon!
Crafty hugs, Eva Scraps

Sunday, September 25, 2016

Birthday Wishes "That" folder

 Today I'm sharing another girly Birthday card.    I am finally getting the chance to use my All Occasion embossing folder also known as "that" folder that I ordered online from the UK.  What a fun easy card to make.
I started off with a piece of dark purple Recollection's card stock which I embossed with my All Occasion embossing folder.    I took my blending foam tool and added some picked raspberry distress ink onto the top portion of the card on the raised designs.    I then took my Simon says stamp bundle of stitched shapes rectangle and die-cut the embossed piece to make my card front.   The adorable cupcake is from Cricut Best of 2009 Cartridge.   I ran the top pink frosting Layer through my Cuttlebug Swiss dots folder.   I then used my spectrum Noir clear glitter pen to brush all over that piece.  I then took a spellbinders diecut tag from twisted metal and cut and then embossed the white layer.  I laid the same diecut on a light purple card stock and traced the inside opening with pencil.   I then took my scissors & hand cut around that piece so that I could layer it over the top with the stamping.  I used Birthday Wishes stamp from my Hot off the press Birthday Greetings stamp set,  which I stamped with Momento Tuxedo black ink.   Before adhering those two pieces together with foam tape I brushed the entire outer edge of the white piece with my Spectrum Noir Clear glitter pen and also lightly went around the edges of the light purple layer with the same pen.   I popped the cupcake up on foam tape and added some little purple flower Gems across the embossed center portion of the card.   This would make a great card to mass produce for either card swaps or just to add several to your card giving stash.

Cricut Best of 2009 cartridge
Craft stash All occasion embossing folder
Cuttlebug Swiss dots embossing folder
Spellbinders twisted metal cutting die
Hot off the press birthday greetings stamp set
Flower bling gems from my stash
Spectrum Noir clear glitter pen
Picked raspberry distress ink

 I am entering into these fun challenges:
Fantabulous Cricut Challenge - Wet or Dry Embossing - Dry
Die Cuttin' Diva's - Challenge #284 Birthday
Scrapy Land - Challenge #50 Happy Birthday



Thanks as always for stopping by to see what I'm up to in my craft room today.  I wish you a wonderful and crafty Weekend, hope to see you again soon.

Crafty hugs, Eva Scraps


Friday, September 23, 2016

Birthday Balloon card

I created this card today to go into some fun challenges this week.    And it will make a great girl's birthday card to stick in my stash .

I just love this awesome paper stack from DCWV, the bright colors and paint splatters are awesome.   The card layout is based on Mary's Sketch #2 over at Cardz TV.   The frames in the center are from Die-Versions whispers called nesting frame one.   The black card stock is from recollections and I cut the back layer with Simon Says stamp stitched bundle of shapes.   I added a cute pink balloon with the white shadow Layer cut from Cricut Artiste cartridge which I popped up on foam tape.   I added some pink and white bakers twine for the balloon string .  The saw tooth sentiment banner I also cut from Artiste Cartridge one in white and a larger shadow Layer in black which I also Popped up on foam tape.   The sentiment stamp is from Craftin Desert Divas - Celebrations stamp set.   I stamped that with Memento Black Tuxedo ink.  I also added two small pink gems on each end of the word banner.

 I am entering into these fun challenges:
CARDZ TV DESIGNERS CARD SKETCH CHALLENGE #1 BIRTHDAY
Hiding in my craft room -  designer paper X3
Die Cuttin' Diva's - Challenge #284 Birthday
Scrapy Land - Challenge #50 Happy Birthday
Mod squad - Celebrate Your Inner Splat
Jo's Scrap Shack - FFC #157 "Anything Goes"

Thanks for stopping by, Have a wonderful and crafty day!
Eva Scraps


Thursday, September 22, 2016

Happy birthday lattice hearts pop up card

This card was super simple  thanks to another fun pop up card file from over at Creative Kuts!

I put this card together using pink and purple card stocks from recollections.  The dark purple background layer I ran through my embossing machine in the cuttlebug Simply Charmed Squares  folder.
I used a Die-Versions Whispers die called Birthday Present in pink which I cut a light purple shadow layer for with my scanNcut 2.  Before assembling the two layers together I took some purple glitter paint that I just purchased and painted the bow and a little scroll design down in the bottom left corner .   However it was much more like glitter glue then glitter paint so I simply sprinkled some purple fine glitter over it.   I added some cute designer recollection's heart Brad's that I thought went well with this card to the top two corners.   I had also picked up some cute sticky puffy banners that I decided to color purple with my spectrum noir markers before attaching to the bottom of my card.   I thought the lattice one would go well on this card.  That is it! Simple Simple!!!  A pretty and girly birthday card to stick in my card stash.

I am entering into these fun challenges:
Die Cuttin' Diva's - Challenge #284 Birthday
Scrapy Land - Challenge #50 Happy Birthday
Jo's Scrap Shack - FFC #156 "Anything Goes"
Little Scrap Pieces - Show it Off Saturday Linky Party


Thanks for stopping by, have a wonderful and crafty day.
Eva Scraps

Fall Pumpkin Burst Card

 I decided to create a fun fall card this morning.   I started off with using the Center Sunrise card file from Cheryl over at Creative Kuts.  
I found the beautiful pumpkin that I popped up on foam tape from the Cricut Thanksgiving cartridge.    I used three designer papers for this project, the two in the Sunburst are from Paper Studio - The Classics paper pad and the orange on the pumpkin is from Cricut Animal Kingdom 6x12 paper pack.   The solid orange for the burst outline and tag are also from a Cricut 6X12 paper pad (Earthtones).  The Beautiful Pumpkin is from Cricut CM Cheerful Seasons Cartridge.  The tag itself is die cut from Simon says stamp - bundle of stitched shapes.   The sentiment Hey Pumpkin! is from Craftin' Desert Divas -  Hey pumpkin stamp set, which I stamped with versamark Ink and heat embossed with detail copper embossing powder.  I love how the copper blends so nicely with the deep Browns on this card.  I also added a couple of yellow gemstones I just picked up yesterday at the dollar store to set it off.... what a great find!  I grabbed up lots of colors.
For the inside I used the same orange paper as on the front of the card from Cricut which I die cut with the Simon says stamp bundle of stitched shapes.   Plus more stamping from the same adorable hey pumpkin stamp set from Craftin' Desert Divas.

 Thanks for stopping by to take a look at my project today I hope to see you around again soon.

I will be entering into these fun challenges:
Hiding in my craft room -  designer paper X3
Die Cut Divas - Fall
Fantabulous Cricut Challenge - Wet or Dry Embossing (Tag Wet Embossed)
Simon says stamp Monday -  Inspired by Music inspired by song - I'm a Little Pumpkin

(here is a link to the lyrics ... sung to the I'm a little teapot tune - http://www.dltk-holidays.com/fall/m-littlepumpkin.htm)

Have a wonderful and Crafty Day!
Eva Scraps

Monday, September 12, 2016

Lattice Pop out Heart Card

Good morning, Wow I have been staying so busy I have not been on here in awhile.  Today I want to share with you the card I have created for my Hubby for our Anniversary.  It will be 10 years this month and I still feel like the luckiest girl in the world. <3
So this card was actually inspired by the inside cut file.  The beautiful center pop out Design that my friend Cheryl over at Creative Kuts created for me.  Wow how stunning the trio  lattice pop out hearts are! 
So I searched through my supplies and decided I wanted to use my HOTP Lacy Things Stamp Set which I did a lot of detail work to achieve the final look.  I started by stamping the large heart on white card stock.  I ran it through my ScanNcut 2 and cut out the outside of the stamped heart.  I set that aside and added a shadow for the cut by sizing it up and cut that in black card stock to back it with.  I also stamped 3 small roses, two on a deep red card stock and the other (center) on white.  I used my craft knife to hand cut the center of the heart out.  I used my cricut to cut the lattice from another one of Cheryl's Pop out card files from white card stock.  I trimmed it to fit behind my stamped heart.  I used my Spectrum Noir markers to color the heart in different shades of red, I also colored the center rose and the lattice with some of those same shades.  I decided to add die cut swirl (Die-Versions Whispers - Leafy Swirl) behind the heart cut from white card stock that I also colored in with red Spectrum Noir Markers.  Also I used foam tape to pop the red stamped Heart with lattice on it over the black shadow layer to give it some added dimension.  The gorgeous mat that I layered all of this onto was created with an edge die on either end of my card front layer cut from the deep red cardstock.  I knew the pretty lattice in it would match up well with the heart I created.  This die is - Crafters Companion Edge'ables Lattice Flourish Die.  The floral striped Paper is from an old paper stack called Rosewood from Colorbok.  I hand cut it to fit over the center of the die cut front.  I also stamped With Love from the same stamp set - HOTP Lacy Things.  All layered onto a black card base to complete the front.
For the center of the card I just simply cut Cheryl's awesome Trio lattice heart pop out layer twice, once in the deep red and once in the Colorbok Rosewood Pattern paper that matches the front.  I then cut away the lattice hearts on the pattern paper one and layered it over the deep red layer with the lattice hearts popping out.  So stunning!  I used the mats from another one of her cards.  The Sentiments were from a CD I purchased from Paper wishes - HOTP 1000 Card Quotes CD and printed onto the ivory card stock.  I then took the top layer of my sentiment mat which I cut out on my cricut, I drew a pencil line around it and had my ScanNcut2 cut it out.  I erased the pencil line and then inked the edges with Walnut stain distress ink.  Layered it onto black mat and placed them onto the inside of card. 

Of course I needed an envelope so I used more of the ivory card stock and my WRMK 123 punchboard to create this envelope.  I did some stamping from the same stamp set,  HOTP Lacy Things.  Plus I added one more item printed from that quotes CD up in the right corner to be used for the stamp and had my SNC2 cut it out for me, I inked the edges and glued it down.

I will be entering into these fun challenges:
Simon Says Stamp Wednesday Challenge - STAMPtember Stamp It
Decorate to Celebrate Anything Goes Challenge #18 
Scrapy Land Challenge #49 Anything Goes  
DL.ART SEPTEMBER LINKY CHALLENGE - Anything Goes
Little Scrap Pieces - Show it off Saturday Linky Party


Thank you for stopping by to see what I am up to in my craft room today, I hope to see you back again soon as I create more fun projects to share with you.

Have a wonderful and crafty day, Eva Scraps